Large hammering garden anchor
Product Code: anker gradoboinui
The large halogen garden anchor is used in the construction of an intensive garden with the subsequent installation of a plastic mesh over the garden to protect it from hail, birds, and the sun.Characteristics of the Hai... Read more...
The large halogen garden anchor is used in the construction of an intensive garden with the subsequent installation of a plastic mesh over the garden to protect it from hail, birds, and the sun.
Characteristics of the Hail Garden Anchor:
- Overall overall length - 1500 mm
- Rebar diameter - from 20 to 32 mm
- Sheet metal thickness on disc / auger - 5 to 8 mm
- Finished product weight - up to 23 kg
- All bending operations take place without heating the metal - this improves strength.
- Welding auger and fittings on both sides
- Fully screwed into the ground in 25 turns
- The plastic mesh should cover the entire garden cage from the top of the post to the ground. This design has a high windage value.
Sailability is the property of any object to perceive the kinetic energy of the wind. It is with this property that high requirements for the strength of the pillars, the guy wire and the hail anchor anchor for the garden are associated. After all, it is these three components that will withstand the maximum loads from gusts of wind. Therefore, the anchor hail anchors are screwed into the ground along the entire perimeter of the cage, and not only to pull the anchor posts. But in order to reduce the cost, an ordinary garden anchor is sometimes screwed in to brace the extreme inter-row posts.
Hailing garden anchors have a distinctive feature from a garden or grape anchor, in addition to the length, thickness of the reinforcement and sheet metal, it is the shape of a disc or auger. It is not round, but octagonal. This is primarily due to sheet metal waste. This anchor is not provided for comfortable manual screwing.
Better yet, watch the video of how a big hailstone garden anchor is screwed in. In the video, an anchor of the following parameters is screwed in: reinforcement of 25 mm, length - 1500 mm, screw diameter - 300 mm, metal thickness - 8 mm, as well as the customer's personal desire for a circular disc / auger shape.