wooden apple container F2-6-B-100

We offer rounded pine poles (diameter 100 mm, 4 meters long) and impregnated with TANALIT-E antiseptic now also for the Ukrainian market. The weight of this post is 25 - 28 kg These pillars are perfect as edge supports, as well as inter-row. Such pillars have a lot of advantages, so they are in great demand in Europe, Turkey, USA: - high strength, - service life from 15 years, - post weight is only 13-15 kg after impregnation, - ease of installation and use, - ecological TANALIT-E, - the possibility of using mechanical harvesting, - sharpening at the end (possibly)...

F1-9-B-1000 is a fruit wooden container for apples of modification No. 1 with nine cubes on a pallet and with the designation B (the upper sheathing board on the sidewalls must be fixed at the same level with the upper edge of the triangular post), 1000 is the main length of the board used in a wooden apple container. The main difference between this modification of a wooden container for apples is the use of a metal zinc-plated bolt for wood 180 mm long for fastening the pallet through a corner cube with a supporting triangular sidewall, the number of cubes for distributing the load on the pallet has been increased, the floorboard on the pallet is located along the width of the container, making the container stronger, but the number of used hardware is increasing. Finished product size: Length - 1200 mm, Width - 1000 mm, Height - 800 mm. This modification was proposed by an enterprise from the Khmelnytsky region. This modification of the wooden container for apples is widely used in Dnepropetrovsk, Donetsk, Zaporozhye regions...

F1-98-B-100 is a fruit wooden container for apples of modification No. 1. Traditional designation B (the top sheathing board on the sidewalls should be fixed at the same level with the upper edge of the triangular post), 100 is the main width of the board used in a wooden apple container. The main difference of this modification is nine cubes on a pallet and eight overlaid boards (two per side). Overhead boards increase the strength of fastening the sidewall to the pallet, but increase the consumption of wood and hardware. Finished product size: Length - 1200 mm, Width - 1000 mm, Height - 800 mm. This modification was proposed by an enterprise from the Khmelnytsky region...

We offer rounded pine poles (diameter 80 mm, length 2.5 meters) and impregnated with TANALIT-E antiseptic now also for the Ukrainian market. The weight of the post is 13-15 kg. These pillars are perfect as edge supports and inter-row. Such pillars have a lot of advantages, so they are in great demand in Europe, Turkey, USA: - high strength, - service life from 15 years, - post weight is only 13-15 kg after impregnation, - ease of installation and use, - ecological TANALIT-E, - the possibility of using mechanical harvesting, - sharpening at the end (possibly)...

Wooden garlic storage container & nbsp; - an excellent modification for storage, long-term transportation and storage of garlic. The size of the wooden container is 1200x1200x1000 mm (LxWxH). Garlic container design with a capacity of 1.44m & sup3; allows you to place 0.6 tons of products without fear of strength. Three wooden beams across the width of the pallet exclude bending of the floorboard, and the side racks made of beams securely fix the products even when the container is rocked by the forklift. The fixing of the rack with a bar to the pallet is realized by means of two galvanized bolts with washers at each corner of the container. The uniqueness of this container is due, first of all, to the peculiarity of the storage of garlic. When storing garlic in warehouses, the required direction of the ventilation flow, without losing dispersion on the sides of the container. Because of this feature, the side planks and the wooden board at the base of the pallet are made with tongue-and-groove fastening. (as an example, a parquet board is made according to this principle), as well as glued with special glue for wood. This connection eliminates even small gaps. For the manufacture of a container with all of the above features, as well as with the features of the garlic itself, we use the board only after drying with a moisture content of 16-20%. The pallet board is 40 mm wide (standard 100 mm) and is fixed at 20 mm intervals. We can conclude that the container for garlic will be very strong and durable, and most importantly, it fully meets all the requirements for long-term storage or transportation of garlic. To achieve the goal, a garlic container costs a lot of wood, additional costs for drying, the manufacture of special fasteners for boards, and special precision in production. All costs are fully reflected in the cost of the garlic container...